Carbon Filters 
Whole House Filtration

Chlorine Removal Tanks

Simple IN and OUT Carbon System - City Water Only

Economy system: Includes a 8"d x 44" h media tank. 3/4 cu. ft. of Highly Activated Carbon. 3/4" piping connections on In & Out head. Useful to 4 gpm flow rate.

Basic system: This is our best seller and great for most residential applications. Includes a media tank ( 10" d x 44" h ), One Cubic Foot of Highly Activated Carbon, and technical support phone number. You will  need to pour media into tank ( with included funnel ), connect inlet, and outlet. Plumbing connections are 3/4". Five years parts warranty on Tank. Rated for up to 8 gpm.

Deluxe system: For higher flow rate requirements or additional capacity, we recommend this system. Includes a 12" d x 52" h media tank, two cubic feet of Highly Activated Carbon, and 1" In & Out connections. Five years parts warranty on Tank. Rated for up to 12 gpm.

The carbon is warranted for 1 year and should last about 3 years. 
The carbon can be replaced for $ 85.00 a cubic foot, when chlorine starts getting through the carbon tank.
  See < Resins, Carbon, Tanks >

The IN & OUT carbon tank system is a simple yet effective means of improving the quality of drinking water in any home that is supplied by a municipal water system ( "city" water ) treated with chlorine.
The system has no moving parts and includes of a rust proof, poly-glass tank which contains a special, high quality activated carbon filter media bed and a distributor head that directs the flow of water through the media bed. The special carbon filter media has been particle sized to provide the most efficient reduction of taste and odor caused by chlorine.

In & Out Design
Water flows in at the top and through the Carbon. It returns up the distributor tube and out. Note: The lower distributor screen is always covered by a gravel under bedding which we include.

 

Automatic Backwashing Carbon System - City Water & Chlorinated Well Water

Basic system includes automatic control valve, mineral tank ( 10" d x 44" h ), One Cubic Foot of Highly Activated Carbon, owners installation/service manual, and technical support phone number. You will  need to pour media into tank ( with included funnel ), connect inlet, outlet, drain line and plug into electric outlet. Set time of day and backwash frequency ( usually once every 12 days ). Plumbing connections are 3/4" unless you ask for 1" ( no extra charge ). Five years parts warranty on Valve and Tanks. The By Pass option is recommended ( for an additional $ 35.00 ).

Deluxe: Two cubic foot of Activated Carbon in a 12" x 52" Polyglass tank. 1" plumbing connections standard ( unless you ask for 3/4" ).

The carbon is warranted for 1 year and should last about 4 years. 
The carbon can be replaced for $ 85.00 ( per cu. ft. ) when chlorine starts getting through the carbon tank.
 See < Resins, Carbon, Tanks >

This system is recommended if there is turbidity in the source water. Such as city water that runs through very old piping or well water that has been treated with chlorine. Regular backwashing will extend the life of the carbon and maintain flow rates.


Fleck 5600 Version

Well Water Applications

Automatic Regeneration for Well Water Odor

Basic system includes automatic control valve, mineral tank ( 10" d x 44" h ), One Cubic Foot of Highly Activated Carbon, a round poly feeder tank ( 5 gallon - not pictured ), owners installation/service manual, and technical support phone number. You will  need to connect inlet, outlet, and drain line. Requires 5 gpm to properly Backwash ( usually once every 6 days ). Plug into electric and add chlorine tablets ( available at pool supply stores without stabilizers additives ) or liquid bleach to operate. Plumbing connections are 3/4" unless you ask for 1" ( no extra charge ). Five years parts warranty on Valve and Tanks. The By Pass option is recommended.

This system works well up to 1 ppm of Hydrogen Sulfide. Larger systems available. Please email for specifics ( include your water analysis results, please ). We will not sell this unit to you, until we are confident it will work on your water quality. Higher levels of Hydrogen Sulfide require larger tanks, or other types of treatment equipment. See < Aerators >

The carbon is warranted for 1 year and should last about 5 years. In most cases, it is required to have a water softener ahead of the Carbon tank to remove hardness, iron, and tannins ( yellow-brown color ).
The carbon can be replaced for about $ 85.00 when the time comes that it is
necessary. See < Resins, Carbon, Tanks >


Fleck 5600 Version
( Feeder not shown )

 

 Please e-mail us for more information. 

Please include the following information to help us
 make sure you get the proper size system.
1. Total number of people using water in the home? 
2. The Hydrogen Sulfide level in parts per million? 
3. If iron is present, what level in parts per million? 
4. Is the water clear or tinted at the source?
5. Are you using a water softener with this system?

We don't just sell equipment, we sell solutions. 
Customer satisfaction is our top priority.

NOTE: 
We assume that your water is bacteriologically safe.  Please have it check by your local health department if you are concerned about the safety of your water.


Who Manufactures Your Filtration Systems?

Our water systems are assembled at a wholesale O.E.M. using either Fleck or Autotrol valves according to our specifications. We use Kavey Water Equipment, a Crane Co.,  located in Venice, FL. They use all new NSF approved materials. You will find this to be the case for most equipment manufacturers in the water treatment industry. The best part is, the 
components used are standardized and not proprietary ( like Culligan, Rainsoft, Kinetico, and Ecowater ). You will have easy access to parts when you need them ( many years from now ). All dealers have access to Fleck and Autotrol parts ( the control valves we use ).The tanks are standard in sizing and threading. The resin is made in the U.S.A. to the highest industry standards.
There are perhaps a thousand different companies manufacturing water softeners. Most use Fleck and Autotrol valves. A few use proprietary valves and sell only through franchised dealers ( Culligan, Ecowater, Kinetico, and Rainsoft ). Their systems are not necessarily any better than a comparable model using a Fleck or an Autotrol valve, they just usually cost more and require that you return to them for service ( since they are the only source for parts for their unique valves ).

 

Site Map To Order E-mail Questions FAQ
 Free Water Test for Hardness, Iron, ph, and TDS.
(
Just mail us a few ounces of your water ).
NOTE: Hydrogen Sulfide levels must be checked at the well source by a trained water treatment professional. Some dealers will give you a "free" analysis and sales pitch.

      Copyright © 1999 -2005  www.softenerparts.com, Andrew Cross
2441 Belle Road, Englewood, Florida, U.S.A.
Free advice is available by e-mail.