|
|
|
|
|
|
|
|
|
|
|
|
|
|
1/2" connecting ELBOW for connection 1/2" brine tubing to Air Check Brine Pickup J-Tube 1/2 " ( BPH4500 - sold separately ).
|
3/8" connecting ELBOW with steel grippers for connection 3/8" brine tubing to Air Check Brine Pickup J-Tube 3/8 " ( FP60002 - sold separately )
|
3/8" compression x 3/8" compression elbow.
Commonly used to connect brine tubing and brine pickup tube together.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2300 Brass Safety Brine Valve 3/8" used with float in the Salt tank to prevent the salt tank from over flowing should the control valve malfunction.
Used to rebuild older Brine Pickup assemblies, as the 2300 brass was commonly used for decades.
|
Float Assembly, 2310, w/30" Rod PN 60068-30
|
Fleck J-Tube 3/8 " X 34 " Long.
Can be cut down to fit your salt tank.
Old p.n. 3460002, now FP60002.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Brine Pick Up Tube with Screen. 36" in length.
Commonly used with Autotrol 155 and 255 Water Softeners.
|
Replaces old brass shut off float pick up assemblies.
Fits inside 3 1/2 " or 4" Brine Well.
|
Safety Brine Valve Assembly, 2310 ( 60014 )
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Complete Brine Valve Assembly, part # 7116488 or 7310197, also called WS15X10005 for GE models.
|
4" x 30" Slotted Brine Well used in a typical Brine tank.
Be sure to order at least one brine well cap to go with it.
|
4" Brine Well Cap for Top of 4" Brine Well.
Not to be used on older 3 1/2" Brine Wells.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Resin Cleaner, Citric Acid in crystalized form, 1.5 pound container
Add 4 - 8 ounces with each 40 - 80 lbs. of salt or to Automatic Feeder ( commonly sold with Sear Kenmore units ).
Cleans and Restores Your Softener
|
Resin Cleaner, Citric Acid in crystalized form, 4 pound container
Add 4 - 8 ounces with each 40 - 80 lbs. of salt.
Cleans and Restores Your Softener
|
Pro Rust Out Resin Cleaner, 5 pound container, of Sodium Hydrosulfite and Sodium Bisulfite.
Add one Rust Out 4 ounce with each 40 - 50 lbs. of salt.
Cleans and Restores Your Softener
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Resin Cleaner, Sodium Hydrosulfite and Sodium Bisulfite.
Add one Rust Out 4 ounce package with each 40 - 50 lbs. of salt.
Cleans and Restores Your Softener
|
Resin Cleaner, Citric Acid and Anionic Surfactants.
Add one Softener Mate 4 ounce package with each 40 - 50 lbs. of salt.
Cleans and Restores Your Softener
|
Brine Pick Up Safety Float with Air Check 1/2 inch Clack 474
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Air Check Brine Pickup J-Tube 1/2 " X 48 " Long.
Can be cut down to fit.
1/2" connecting elbow ( JF508NSG ) sold separately.
|
Float Seal for Brine Valve Assembly - 0516947
|
Injection molded 18" Round white plastic Salt Grid ( Brine Grid ) fits most round brine tanks.
We can not guaranty a tight fit, but should fit all 18" diameter round salt tanks.
And has a 4" hole for a "brine well" to sit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Grid- Salt Tank, 24" Round with 3 inch Legs
|
Injection molded Black Salt Tank Lid fits most round brine tanks.
We can not guaranty a tight fit, but the lid should fit all 18" diameter round salt tanks.
|
Almond LID for the 11 x 11 x 38 Almond Brine Tank.
This is just the Lid.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Almond LID for the 14 x 14 x 34 Almond Brine Tank.
This is just the Lid.
|
Cover or LID for the 15 x 17 Brine Tank.
This is just the Lid.
|
Nut used on 1650 Brine Valve Assembly GFN 19625
The BLFC fitting and Brine Valve ( 1650 ) are normally reused.
Or they can be purchased separately.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Overflow Fitting With Nut mounts on the side of the brine tank.
Allows you to attach a hose to devert the water should the salt tank start over filling.
|
Felt pad used inside Potassium Permanganate feeder tanks made by Clack Corporation.
Manufacturer's part number N1043
|
This Feeder ( 30CC - 1OZ feed rate ) holds one quart of ResUp ( amount normally used in one month ).
Made to be mounted inside Salt Tank.
Click on Instructions below to Enlarge for Viewing
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Liquid Sanitizer Concentrate for sanitizing Water Softeners, RO Units, and Water Coolers.
Cleans and Restores Your System
|
11 x 11 x 38 Brine Tank with lid.
Empty, uncut, nothing inside.
Where space is limited, this is the size to use.
|
14 x 14 x 34 Almond Brine Tank.
Empty, uncut.
In most of the country we are substituting with Brine Tank 15" x 17" x 36" Almond with Blow Molded Cover
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
18 inch diameter X 33 inch height Almond w/cover.
Empty, uncut.
Nothing inside.
Lid may be Black, or Almond.
|
18" X 40" Almond Tank with Black Injection Molded Cover.
Empty, uncut.
|
Almond Brine Tank, 18" Round x 33" Tall, complete with Brine well and Brine Safety Float Pickup Tube with Air Check installed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
18 x 40 Almond Brine Tank with Safety Float Pickup Tube Assembly, 3/8" connection, installed in 4" Brine Well, with cap.
No salt grid.
|
Commercial Brine Tank 24 x 50 with lid
Rate for 900 lbs. of salt or 100 gallons storage.
Empty, uncut, polyethylene made by Clack Corporation.
|
Commercial Brine Tank 39 x 48 Complete
Normally ships by Freight Truck due to large size.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Windsor Cabinet Brine Tank with Hole for Resin Tank.
35.75" H x 21.5" D x 13.5" W Almond with salt lid.
Empty, uncut.
Nothing inside.
Valve Cover included.
|
3/8" OD Black Tubing sold by Foot
|
Special size of Brine tubing ( 5/16" O.D. with a 0132" wall thickness ).
Tubing sold in 66 inch sections ( enough to replace all lines in brine tank ).
|
|
|
