Repair Parts

Accessories

You are here: Home > Autotrol

Choose a sub category: 155 / 1550-TC 163 / 168 255 263 / 268 Performa Technetics 1000 Valve Replacements

Autotrol Repair Parts Models 155, 1550-TC, 150, 160, 163, 168, 255, 263, 268 * Parts listed alphabetically and Made by GE Osmonics Autotrol 155 Rebuild Kit for Autotrol 155 Valve Body 168 Rebuild Kit for Autotrol 168 Valve Body Your Price: $87.00 Your Price: $87.00 All the parts that go into the Autotrol 155 Valve Body, plus orings to tank adapter. Valve Body Rebuild Kit for Autotrol 168 24NC ( K-5 Less 440iHV Timer Assembly) 255 Rebuild Kit for Autotrol 255 Valve Body Your Price: $169.00 Your Price: $82.00 Autotrol 255 Upper Valve Body Replacement without Timer Assembly. Includes new style cover, which will require slight modification ( cut a little off ) when used with tank adapters that have the 36F Air Check ( pre-1994 models of 155 ). All the parts that go into the Autotrol 255 Valve Body, plus orings to tank adapter. 255 Upper Valve Module w/Logix 740 Timer Assembly 255 Upper Valve Module w/Timer Assembly Your Price: $219.00 Your Price: $249.00 Autotrol 255 Upper Valve Module with 740 LOGIX Timer Assembly,12 volt transformer, camshaft, cover and Oring kit. Fits all Autotrol 255 and some late model 155 Series Tank Adapters ( old style 155 Air Check, 36F, will hit new top plate and therefore CAN NOT be installed on your tank adapter ). Autotrol 255 Upper Valve Module with 460TC Timer Assembly, transformer, camshaft, cover and Oring kit. Fits all Autotrol 155 and 255 Series Tank Adapters. This is not the complete valve, just the upper valve body and timer assembly. 440 Replacement Timer Assembly 440i HV w/Cord 440 Timer Case Empty - 1031737 , 420N66 OBSOLETE Complete 440i for 120 volt 60 hz installations Uses Revised 6 Day Skipper Wheel, and comes ready to plug in. 440 Timer Case Empty, pn 1031737, old pn 420N66. OBSOLETE Part, No Longer Available. Recommend buying new 440iHV Complete Timer Assembly. 440i HV Back Plate 1001690 1001691 460i Output Gear Your Price: $44.95 Your Price: $8.95 440i HV Back Plate Bare Housing Back Plate Only. You will need to transfer motor and gears from your old Back Plate. Large Black Output Gear ( 100095 ) used in 460i Only. 460i Timer 12 volt. 460i Timer w/ Transformer Your Price: $199.00 Your Price: $219.95 460i Metered Demand Timer ( 12 volt and 60 Hz ) will replace your defective electronic control ( NovRam, 460, 460i ). Requires separate 12 volt transformer. Autotrol Electronic Metered Timer Assembly with Transformer for 12 Volt operation from your 120 Volt 60 Hz outlet. Replacement for NovRam, 460, and 460i Timer Assemblies. 460TC Replacement Timer Assembly for 440 series Adapter Kit - 1" Copper Tubes Your Price: $119.95 Your Price: $25.00 460TC Replacement 7 DAY Timer Assembly for 440 series, with 12 volt Transformer A Pair of 1" I.D. Copper Tubes, Large nuts, and Gaskets ( part # 54F ). Used to connect to Autotrol Valves ( like 163, 168, 263, 268 )directly or to any Autotrol By Pass. Adapter Kit - 1" PVC Tubes - 1040393, 1001614 Adapter Kit - 3/4 inch plastic NPT male tube pair- 1000982, 1001769 Your Price: $23.95 Your Price: $21.95 A Pair of 1" I.D. PVC Tubes, Large nuts, and Gaskets ( part # 54F ). Used to connect to Autotrol Valves ( like 163, 168, 263, 268 )directly or to any Autotrol By Pass. Commonly used with Autotrol 155 and 255 By Pass valves. Alternate part # 1001614 Plastic Male Threaded 3/4" Adapter Kit 1000982 or 1001769 Includes A Pair of 3/4" male NPT Tubes, A Pair of large Black Nuts, and A Pair of Gaskets ( part # 54f ). Used to connect to Autotrol Valves ( like 163, 168, 263, 268 )directly or to any Autotrol By Pass. Commonly used with Autotrol 155 and 255 By Pass valves. Adapter Kit - 3/4" Copper Tubes - 1040385 Adapter Kit - 3/4" PVC Tubes - 1040392 Your Price: $25.00 Your Price: $22.50 3/4" I.D. Copper Adapter Kit Comes with 2 copper tubes, 2 large plastic nuts and 2 gaskets ( # 54F ) Used to connect to Autotrol Valves ( like 163, 168, 263, 268 )directly or to any Autotrol By Pass. Commonly used with Autotrol 155 and 255 By Pass valves. Alternate part # 1001606 3/4" PVC Adapter Kit 1001613 Includes A Pair of 3/4" PVC Tubes, A Pair of large Black Nuts, and A Pair of Gaskets ( part # 54f ). Used to connect to Autotrol Valves ( like 163, 168, 263, 268 )directly or to any Autotrol By Pass. Commonly used with Autotrol 155 and 255 By Pass valves. Alternate part # 1001613 Air Check - New Style Kit 1032416 ( 1032417 ) Air Check Assembly Old Style - 36F - OBSOLETE Your Price: $12.99 Air Check - New Style ( kit 1032416 ) used from about 1993 to present. Can NOT be used in place of the old style ( see part # AP36F ). Used only on late model Autotrol 155 and all 255 water softener valves. OBSOLETE PART > Air Check Assembly used on Autotrol 155 prior to 1993. Assembly threads on to Tank Adapter. Old PN # 36F - No longer made, nor available from any source. Autotrol Timer Free Online Videos Backwash Control Plug 25F Your Price: $9.95 Autotrol Timer Set Up and Operation explained for the 440, 460TC, and Logix 740 Timer Assemblies. Backwash Control - Comes with Orings ( 2F and 3F ) installed. Please select tank diameter. Note: Your old Back Wash should have a small number on it that matches your resin tank diameter. Ball for Flow Control Autotrol - Old 4F , New 1030502 Ball New Style Aircheck - 1030528 Your Price: $1.99 Your Price: $1.99 Rubber Ball - Used to regulate flow behind backwash plug and brine control dial. Old part number 4F, and newer part number 1030502 Ball used in New Style ( since 1993 ) Aircheck of the Autotrol 155 and 255 Valves. Not to be Confused with the small 4F flow control ball. Blending Valve Autotrol 255 PN 1041195 Brine Control Assembly 1 to 10 lbs. 1F-10 new PN 1034261 Your Price: $5.98 Your Price: $27.95 Blending Valve Autotrol 255 PN 1041195 Brine Control Assembly 1 lb. -10 lbs. range. Old part # 1F-10. Newer part # 1032994 or # 1034261. Comes complete with the 2 orings. Brine Control Dial 3-19 lbs. 1F-19 or 1034263 Brine Refill Plug - Logix Backwash Valves PN 1030334 Your Price: $24.95 Your Price: $9.95 Replacement Brine Control Dial for Autotrol, 3 lbs. - 19 lbs. range. This is the replacement for both old and new style Brine Controls. Old part # 1F-19, New part # 1032996 or 1034263 Comes complete with the 2 orings. Brine Refill Plug - Logix Backwash Valves PN 1030334 Brine Regenerant Refill Controller 0.33 gpm PN 1243510 By Pass 256 New Style For Autotrol 155 And 255 Your Price: $8.95 Your Price: $36.95 Brine Refill Controller 0.33 gpm PN 1243510 By Pass for the Autotrol 255 valve By Pass Adapter Gasket 54F - 1030541 By Pass Repair Kit for New Style 256 - 1034302 Your Price: $1.00 Your Price: $17.95 Gasket (old # 54F or newer # 1030541 ) used for all size Adapter Nuts on Autotrol Adapters used on all versions of the Autotrol By Pass Valves and for direct connects  to older 168 Valves and newer 268 Performa Valves. Kit, Service, 4 Oring Seals, Two Rubber Squares and Two Clips. This Repair Kit is for the newer style By Pass used for Autotrol 255 valves ( called the 256 By Pass ). By Pass Series 1265 Performa 1040930 Bypass Repair Kit - Obsolete Your Price: $47.00 By Pass used on Autotrol ( 263, 268 ) Performa Series Valves. By Pass is called the 1265 ( part # 1040930 ). Includes 2 gaskets (old # 54F ) for the connection to the Valve side. You may want to purchase 2 gaskets ( 1054F below ) for "house" side adapter nuts to insure a leak free seal. (101N plus 2 each, 47F,48F,49F,50F ) As the stem shaft is no longer available, this kit is now obsolete. Please purchase the new style By Pass for your Autotrol 155 or 255 Valve. Cable - Motor and Optical Sensor used with Logix Control 1235361 Cam Gear 1100 English 1034362 Your Price: $30.00 Your Price: $34.95 Cable that connects to the Motor and Optical Sensor used with Logix Electronic Metered Control 1235361 THIS CABLE ONLY. NO Motor with this item. Cam Gear ( main gear ) 1034362 used on the Technetic Plus Countercurrent 1100, and other models # 4 on the diagram Camshaft 255 Logix 700 series pn 1235353 or 1236251 Camshaft 155 & 255 part 21F3 or 1031950 or 155C174 Your Price: $24.00 Your Price: $9.95 Camshaft 255 Logix 700 series pn 1235353 or 1236251 control valves. This is the newer Logix version, and works with the 700 series of Autotrol 255 valve ( 268 performa uses a LONG version ). Camshaft used for Autotrol 155 & 255 water softener control valves. Newest part # 1031950, Standard One-Piece. Camshaft 168 Valve - 1033036 - OBSOLETE Camshaft 263 Performa Backwash Valve Gray 1035624 Your Price: $24.00 OBSOLETE - No Longer In Stock 168 Camshaft for Softener Applications. Autotrol 263 Performa camshaft for Backwash only applications. Camshaft is one piece, has part number 1035624 on it, and is Grey in color. Revision D. Camshaft 268 Performa Valve Iron Filter Purple 1030376 Camshaft 268 Performa Valve Softener Black 1035625 Your Price: $24.00 Your Price: $24.00 Autotrol Camshaft 268FA/440i - Purple camshaft ( revision E ) for Iron Filter only applications. Camshaft is one piece, has part number 1030376 on it, and is Purple in color. Autotrol Camshaft 268/440i - Black camshaft ( revision C ) for Softener only applications. Camshaft is one piece, has part number 1035625 on it, and is Black in color. Camshaft Bearing - Extended for I Lid Cover Camshaft Bearing part 22F or 1030501 Your Price: $3.00 Your Price: $2.50 Extended Camshaft Bearing ( 1000297 ) used to hold back end of Camshaft and longer "I" Lid Covers. Camshaft Bearing used to hold back end of Camshaft on most Autotrol Valves. Camshaft Clips Performa Valve 400 series 1035778 Camshaft Out Put Connector 440i 460i pn 1001833 Your Price: $2.50 Your Price: $6.95 Camshaft Clips  Performa Valve 400 series 1035778 New Style Output Connector used to connect to CamShaft on the 440i & 460i Timer Assembly. Used on all 255, 263, 268 timer assemblies. Part Number 1001833. Does not use C - Clip, but can only be used on 440i or 460i Back Plates that have a slot for the "arrow" to slide through from front of timer to back of timer housing. Camshaft Out Put Connector Autotrol 21E or 1031496 Camshaft Output Connector C-Clip 20E - OBSOLETE Your Price: $5.95 21E Output Connector used to connect to CamShaft on the 440 & 460 Timer Assembly. Used on all 155, 163, 168, 255 timer assemblies. Part Number 21E or 1031496. Steel Snap Ring on Out Put Connector 21E - OBSOLETE Camshaft XS 155 & 255 part 1033025 Cap, for Autotrol 180, New Part No. 1035022 Your Price: $24.00 Your Price: $31.24 Camshaft XS 155 & 255 part 1033025 Cap, New Part No. 1035022 for the Autotrol 180 old part number 36G, SPECIAL ORDER - 2 weeks delivery time. Cover Autotrol 155 and 255 - 1032565 Cover I Lid Your Price: $12.50 Your Price: $19.95 Standard Cover used for Autotrol 155 and 255 Valves. Old PN 20F, New PN 1032565 Cover"I" Lid with "window" on the front used on Autotrol 163, 168, 169, 263 and 268 Valves. Requires extended Camshaft Bearing ( part 101000297 ) if used on Autotrol 155 or 255. Diaphragm Auxiliary Back Wash Autotrol 1030627 Drive Gear for a Technetic 1000i 1100 PN 1032250 Your Price: $12.00 Diaphragm Auxiliary Back Wash Autotrol 1030627 Obsolete item. NONE left. Drive Gear for a Technetic  1000i 1100 PN 1032250 Elbow, 1/4 f x 3/8 c Fitting Plastic Jaco Elbow, 3/8 f x 3/8 c Fitting Plastic Jaco AT1002735 Your Price: $2.95 Your Price: $2.95 1/4" female thread x 3/8" compression elbow. Most commonly used on New Autotrol Air Check for some late model 155 and all 255 Valves. 3/8" female thread x 3/8" compression elbow. Used on some threaded "pick up" assemblies. And used for the Autotrol Performa brine connection. Face Plate 440 Timer Flapper Valve Disc Set 155 and 168 Series 155A152, 1033013 Your Price: $3.95 Your Price: $39.95 440 Timer Face Plate to replace older metal face plate when switching to Empty 440 Timer Case. Flapper Valve Disc Set, # 155A152 for 155, 150, 160, 163, and 168 Series Valves. Osmonics newer part # 1033013. Some older manuals have part # 165N109 as the part number for this SET. Flapper Valve Disc Set 255 Autotrol GE Osmonics 1000250 Flapper Valve Disc Set Performa 1041174 Your Price: $24.95 Your Price: $39.95 Valve Disc Set for the Autotrol 255, PN 1000250. Autotrol ( GE Osmonics ) 255 Valves have been in use since late 1995. It replaced the Autotrol 155, which was made from 1970 until late 1995. Valve Disc Set for the Autotrol Performa 263, 268, and 269. Flapper Valve Disc Set Technetics 1000 series - 1040717 Friction Washer 440 Timer Your Price: $79.95 Your Price: $1.00 1040717 Flapper Valve Disc Set for Technetics 1000 and 1100 series made by Autotrol, Osmonics old part # 1000N72G1. Friction Washer 440 Timer used under Skipper Wheel Gear Tripper Arm Assembly 99F Gear - # 7 Black 420A43 - 1031554 Your Price: $9.50 Your Price: $2.95 99F Tripper Arm and Gear for Autotrol 440 and 440i Timer Assemblies. Black Drive Gear # 7, 420A43. This gear drives the Tripper Arm Gear ( 99F ). Gear - # 8 Black 420A44 - 1030844 Gear - European Black 420A48 - 1030845 Your Price: $2.95 Your Price: $2.95 Black Drive Gear # 8 . This Gear Drives the large Red or Black Output Knob Gear. Gear - European Black 420A48 - 1030845 Gear - Red or Black Output 440 Timer - 420B52, 1001583 Gear Tripper Arm 6 Day REVISED PN 3007499 Your Price: $6.49 Your Price: $11.95 Red Output Gear for 440 Timer, Old part number 420B52. NEW COLOR IS BLACK for this Gear ( new pn 1001583 ). Identical to older Red version. Gear Tripper Arm 6 Day REVISED PN 3007499 Gear Tripper Arm 7 Day REVISED PN 3007520 Injector Cap 8F-BB Our Price: $11.95 Your Price: $4.50 REVISED 7 Day Tripper Arm and Gear for REVISED Autotrol 440iHV Timer Assemblies made since January 2008. "Old Style" Injector Cap. Comes with new oring. Used on all Autotrol valves 155 which were made up until 1996. And all Autotrol 163,168,and 169 which were made up until 2000. Newest PN = 1032974 Injector Cap 8F-CC Injector Cap, Autotrol 1000218 1000269 Your Price: $4.50 Your Price: $3.95 8F-CC Injector Cap with oring ( old 6F ), new part number is 1032975.Was used in older Autotrol 155, 160, 163, 168, and Technetic 1000 Valves. Very old versions were white and pointed. Injector Cap ( 1000218 or 1000269 ), Newer 255, and 268 Valves. Also, part 25D for old 168FA Valve. Injector Screen & Cap Large Injector Screen Cap 7F or 1032991 Your Price: $5.95 Your Price: $4.95 Injector Screen & Cap 255, and 268 Autotrol Valves. Injector Screen and Cap with Oring. Used in older models 155, 163, and 168. Injectors For Autotrol LOGIX Valves Injectors For Autotrol Valves - 28F Your Price: $7.95 Your Price: $7.95 Injectors For Autotrol LOGIX Valves Injectors For Autotrol Valves w/Orings ( 26F & 27F ) included. White AA = 1032970 Blue BB = 1032971 Red CC = 1032972 Green DD = 1030272 International Motor - Timer 12 V 50 Hz Outside U.S.A. Autotrol 440i Knob - Black B.P. old 155/168 Your Price: $46.00 Your Price: $2.95 Timer motor used in 440i 12 volt 50 Hz AC CW 3W 1 RPM G. E. Osmonics - Autotrol Part Number 1001568 50 Hertz motor used in many countries outside the U.S.A.( where 60 Hertz is standard - not this 50 Hertz version ). Black Knob used on old style By Pass for Autotrol 155 and 168 series. Knob - White old B.P. 155/168 - OBSOLETE Locking Bar For Autotrol 155 & 255 Your Price: $8.95 OBSOLETE - White Knob ( And only a few BLACK Knobs are left  ),used on older style By Pass for 155 and 168 Autotrol Valves. Locking Bar For Autotrol 155 & 255 Locking Ring 263, 268 Performa - PN 1035622 Manual for Autotrol 155 ( 1550-TC ) Your Price: $6.95 Your Price: $10.00 Locking Ring used on Autotrol 263 and 268 Performa Valves. PN 1035622 Installation, Operation & Maintenance Manual for the Series 155 ( which is the same as 1550-TC ). It is 16 pages. Copyright 10/1991. Manual for Autotrol 255 Softener Manual for Autotrol Technetics 1000 Your Price: $10.00 Your Price: $10.00 Manual for Autotrol 255 Softener with 440i Timer Manual for Autotrol Technetics 1000  Softener Meter Turbine 460B32 - 1033057 Micro Switch Service kit Top Plate Mount 5 amp Logix 1239754 Your Price: $14.95 Your Price: $36.00 Autotrol Turbine used in Valves with Electronic Demand Regeneration Timers. Used with 460 and 460i and 960 and Technetics 1000. Newer PN 1033057. Micro Switch Service kit Top Plate Mount 5 amp Logix 1239754 used on Autotrol ( 263, 268 ) Performa Series Valves. Used to "lock out" other filtration equipment or send "signal" when Valve is in Regeneration ( Backwash ) process. Micro Switch Technetics Plus series - AVP-1000906 Motor - 460i Drive Motor 2/3 rpm Your Price: $14.95 Your Price: $49.95 Micro Switch Technetics Plus series - AVP-1000906 Drive Motor used in 460i electronic timer assemblies. Voltage rating 8.5 to 13 VAC, 60 Hz, 2/3 rpm. Motor - 463i Drive Motor 1 1/3 rpm Motor - Drive used with Logix Control 1235361 Your Price: $54.00 Your Price: $45.00 Drive Motor used in 463i electronic timer assemblies ( rare backwash only version of the 460i ) Voltage rating 8.5 to 13 VAC, 60 Hz, 1 1/3 rpm ( twice as fast as the 2/3 rpm in the 460i ). SPECIAL ORDER ITEM Drive Motor used with GE Osmonics Logix Electronic Controls ( 740, 742, 760, 762 ). PN 1235361 THIS MOTOR ONLY. NO Cable with this item. Motor - Timer 115v 98F-1 or 1030846 or 1000376 Motor - Timer 12 V 60 Hz Autotrol 440i USA Your Price: $39.95 Your Price: $33.95 98F-1, 1030846,  1000376, and 420A56, are all part numbers for this 115 V, 60 Hz, 1 RPM Timer motor used in 440 Timer assemblies. 12 volt 60 Hz AC CW 3W 1 RPM osmonics-autotrol PN 1001569 Motor - Timer 230 volt 50 Hz 98F-2 ( 1030848 ) - OBSOLETE Motor - Timer 24v 98F-3 , 1030850, 420A61 Your Price: $29.95 OBSOLETE, No longer available. 98F-2, 230 Volt, 50 Hz, 1 RPM Timer motor was used in 440 Timer assemblies in many countries outside of North America. We only have 12 volt 50 hz motor available, which requires matching transformer. 98F-3, 1030850, 420A61 are all part numbers used for this 24 V, 60 Hz, 1 RPM, CW Timer Motor used in Autotrol 440 Timer Assemblies. Motor - Timer 440i Two Wire plug in 120 V - OBSOLETE Motor Drive Technetics Plus series - AVP-1034347 Your Price: $65.00 1034479, Motor used in some 440i timer assemblies. is now OBSOLETE Connected to 120 Volt Two Wire Power Cord by a special plug in on motor, unique to this motor. You will now need to use the standard timer motor used for decades in the 440 timer, part 98F-1. Motor Drive Technetics Plus series - AVP-1034347 O-ring 1 x 1-1/4 x 1/8 inch 1010140 O-ring 1-5/16 x 1-1/2 x 3/32 inch 1010129 Your Price: $2.00 O-ring 1 x 1-1/4 x 1/8 inch 1010140 used on the Technetic Plus Countercurrent 1100, and other models # 26 on the diagram O-ring 1-5/16 x 1-1/2 x 3/32 inch  1010129 is OBSOLETE OBSOLETE - Brine Regenerant Refill Controller 0.33 gpm PN 1000222 Optical Sensor used with Logix Electronic Metered Control 1235361 Your Price: $8.95 Your Price: $30.00 Regenerant Refill Controller, No Ball, 0.33 gpm. Comes complete with the 2 orings. Optical Sensor, PN 1235373, used with  Logix  Electronic Metered  Control. Oring - Backwash Plug 2F Oring - Backwash Plug 3F Your Price: $1.00 Your Price: $1.00 Large Oring used on Backwash Plug and Brine Control Dial on Autotrol Valves. Part # 2F or 1010110 Smaller Oring used on Backwash Plug and Brine Control Dial on Autotrol Valves. Part # 3F or 1010108 Oring - Top of Tank 43F or 1010429 or 1010154 Oring 1" Distributor 1010428 Your Price: $6.00 Your Price: $1.99 Large Top of Tank Oring. Between Valve and Tank, old part # 43F. Newer Autotrol part number is 1010429. Oring for 1.05" distributor used in most newer Autotrol 163,168,255,263,268 valves. Part Number 1010428 also pn 1232370 O-ring 3/16in. x 3/4in.x 1 in. EP Oring 13/16" 31N Oring 48F By Pass Your Price: $1.99 Your Price: $1.00 Oring 13/16" 31N Used in Autotrol 155 and first year ( 1995 ) models of Autotrol 255. Newer 255 and most 168 models use the 1" version ( AP1010428 ). 48F small oring 1/16 x 3/8 x 1/2 used in old style Autotrol By Pass Valves. Oring By Pass old 49F or 1010412 Oring By Pass Stem Your Price: $1.00 49F Oring used in old style By Pass Autotrol 102N Oring for Older By Pass Stem ( two required ). No Longer Available. Oring for Air Check Newer Style Oring Kit Piping Manifold 1040459 Your Price: $2.50 Your Price: $4.50 Oring used with Air Check - New Style used from about 1993 to present. Used on late model Autotrol 155 and all 255 water softener valves. (2)38F & 39F ( valve body to by pass or piping boss ) Old part number 150A144. New part number 1040459. Oring Kit K-7 1001404 Tank Adapter to Valve Body Piping Boss - 3/4" Noryl w/Kit Your Price: $7.95 Your Price: $13.95 Valve Body to Tank Adapter O-rings 32F,(4)35F,& 37F Includes small tube of silicone lubricant 3/4" Noryl Piping Yoke with Orings and Bolts included Old PN 157A140, New PN 1040279 Piping Boss - 3/4" NPT 1040277 steel w/Kit 150A140 Piston Assembly, New Style for Autotrol 180 1035069 Your Price: $24.95 Your Price: $180.87 3/4" NPT Stainless Steel ( use to be Brass ) Piping Yoke with Orings and Bolts included Old PN 150A140, Newer PN 1040277 or 3023763 NOTE: Drain opening is 3/8" NPT. Piston Assembly New style with black rubber seal, New Part No. 1035069 for the Autotrol 180 old part number 35G, SPECIAL ORDER - 2 weeks delivery time. Power Cord 110V 440i Two Wire OBSOLETE Power Cord 110v 90F Your Price: $5.00 Power Cord 110V 440i Two Wire Ungrounded 90F, 3 wire power cord used on Autotrol 440 Timer Assemblies for 30 years. Is specially made to connect to Timer ( 98F-1 ) and Autotrol Valves. Refill Sensor Probe for Salt Detector Logix Upgrade PN 1244336 Retainer for Spring Tripper Assembly 440 Timer part 88F Your Price: $75.00 Your Price: $1.00 Refill Sensor Probe for Salt Detector Logix Upgrade PN 1244336 Retainer used with Tripper Gear Assembly 440 and 440i Timers. Commonly called part # 88F in diagrams. Screw Autotrol Valve 33F - 1006093 - 1234170 Screw Autotrol Valve 85F - 1006091 Your Price: $1.00 Your Price: $1.00 Screw Autotrol Valve 33F - 1006093 - 1234170 used Autotrol 155, 255, 163, 168, and others. One used to hold Locking Bar on Models 155 and 255. Same stainless steel self tapping screw used to hold Top Plate to upper valve body ( 11 or 12 depending on model ). Screw Autotrol Valve 85F - 1006091 used with older 440 Timer Shaft Stem 155 Bypass - Obsolete Silicone 1 Gram Tube Lubricant for O-rings Your Price: $1.89 Shaft Stem for old style By Pass used on Autotrol 155 and some old 255 Valves. This part is no longer available. Please order the New Style By Pass for your Autotrol 155 or 255 valve. One gram of food grade silicone for use with o-rings, gaskets and seals. Enough to lubricate about a dozen or more o-rings and seals. These tubes come from one of the leading valve manufacturers. Six Day Skipper Wheel Skipper Wheel 6 Day REVISED PN 3007524 Your Price: $9.50 Our Price: $11.95 Six Day Skipper Wheel Each pin pushed IN will cause valve to regenerate at 2 a.m. Skipper Wheel 6 Day REVISED PN 3007524 Skipper Wheel 7 Day 14F-7 1031742 Skipper Wheel 7 Day REVISED PN 3007523 Your Price: $9.50 Our Price: $11.95 Seven Day Skipper Wheel ( 14F-7 or 1031742 ) used on Autotrol 440 and 440i Timers Skipper Wheel 7 Day REVISED PN 3007523 Spring Autotrol Valve Spring for Output Gear PN 22E Your Price: $1.00 Your Price: $1.00 Spring used since mid 1980's on Autotrol 155, 255, 163, 168, and others. Spring used with Output Gear on 440 and 440i Timers. Commonly called part # 22E in diagrams. Spring Tripper Assembly 440 Timer part 87F Spring, One Piece used on 255 Logix 700 series Your Price: $1.00 Your Price: $11.95 Spring used with Tripper Gear Assembly 440 and 440i Timers. Commonly called part # 87F in diagrams. Spring, One Piece used on 255 Logix 700 series Valves This is the newer Logix version, and works with the 700 series of Autotrol 255 valve ( 268 performa uses a LONGER version, pn 1235339 ). Spring, One Piece used on Performa Logix 700 series Tank Adapter 31N or 1033064 or 1033784 Your Price: $11.95 Your Price: $99.00 Spring, One Piece used on Performa ( 263 and 268 ) Logix 700 series Valves This is the newer Logix version, and works with the 700 series of Autotrol Performa valve ( The 255 Valve uses a SHORTER version, pn 1235341 ). Autotrol Tank Adapter 1033064 ( new 255 series 1033784 ) replaces 31N used on Series 155 models. Comes with new style air check assembly, top of tank oring and 1.05" distributor oring. Tank Adapter Air Check Adapter 100A140802 or 1033066 Timer Assembly 440i 12 Volt 50 Hz Outside U.S.A. Autotrol Your Price: $9.95 Your Price: $129.00 Air Check Adapter to allow use of older style Air Check ( 36F )on newer Tank Adapter ( after 1993 ). Or used to allow a direct elbow connection to tank adapter. Please do not order this part unless you are positive you need one. Timer Assembly 440i 12 volt 50 Hz AC CW 3W 1 RPM G. E. Osmonics - Autotrol 50 Hertz motor used in many countries outside the U.S.A.( where 60 Hertz is standard - not this 50 Hertz version ). Transformer sold SEPARATELY. Timer Assembly 440i 12 Volt 60 Hz - Requires 12 volt transformer Timer - 760 Logix Electronic Metered Control USA 60 HZ Your Price: $189.00 Timer Assembly 440i 12 Volt 60 Hz - Requires 12 volt transformer AC CW 3W 1 RPM G. E. Osmonics - Autotrol Transformer sold separately. 60 Hertz motor used in the U.S.A.( where 60 Hertz is standard - not 50 Hertz version used in other countries ). 760 Logix Electronic Meter Control Timer Assembly made to operate on 12 volts and 60 Hz. This is Just the Controller. Note: This control is sold as a replacement for your old 760. and can not be used on a valve using the 400 or 900 series timers, as the controller would not fit, and special camshaft and rear driver motor is used with the Logix Timers. Timer - 762 Logix Electronic Metered Control USA 60 HZ Timer 740 Logix Electronic Board Only 1269121 Your Price: $199.00 Your Price: $99.00 762 Logix Electronic Meter Control Timer Assembly made to operate on 12 volts and 60 Hz. This is Just the Controller. Note: This control is sold as a replacement for your old 760 or 762, and can not be used on a valve using the 400 or 900 series timers, as the controller would not fit, and special camshaft and rear driver motor is used with the Logix Timers. Timer 740 Logix Electronic Board Only 1269121 Timer Locking Pin - 5F , 1031391 Top Plate Autotrol 255 and 440 or 460 series 1033067 Your Price: $1.00 Your Price: $39.95 Timer Locking Flag Pin used to hold timer assembly in place. Old PN # 5F and Newer PN # 1031391. Older versions were white, and the new version is black. Top Plate Autotrol 255 and 440 or 460 series 1033067, includes springs. Transformer 120v/60hz to 12vac - 1000811 3019151 Transformer British 220v/50hz to 12vac - 1000813 Your Price: $19.95 Your Price: $29.95 Transformer 120v/60hz to 12vac 60 hz used with many Autotrol valves in the U.S.A. PN 1000811 Transformer 220v/50hz to 12vac used with many Autotrol valves in Britain or using the British outlet and voltage. Required for 440i low voltage and 460i electronic timers ( and new Autotrol electronic timers ). Plugs into a small jack located on the Timer Transformer Outdoor120v/60hz to 12vac - 1235448 Transformer Universal 230v/50hz to 12vac - 1000814 Your Price: $19.95 Your Price: $39.95 Transformer Outdoor120v/60hz to 12vac - 1235448 Transformer 230v/50hz to 12v AC used with many Autotrol ( GE Osmonics ) valves. This is the "C" outlet and voltage. Required for 440i low voltage and 460i, 740, 760 electronic timers ( and a few other timers ). Plugs into a small jack located on the Timer Tube Bushing 13/16 x 1.05 part 1041010 Tubing 3/8" OD Black Tubing sold by Foot Your Price: $5.00 Price per Foot: $0.33 ENTER # of Feet You Need 13/16" Tube Insert ( 1041010 ) used to allow newer Valves with 1.05" distributor openings to use the older style 13/16" O.D. distributor tubes found in all older Autotrol 155 and some other older Valves. Insert is placed into the bottom of the Valve opening. 3/8" OD Black Tubing sold by Foot Turbine Assembly Kit 155/255 Turbine Meter Assembly - 1033444 Your Price: $35.00 Your Price: $29.95 Meter Adapter used on Autotrol 155 and 255 Valves. Common Timers used with this assembly are 460NovRam, 460i, and 760,or 762 Logix. Turbine assembly used in Autotrol 163, 168, 169, 268, 269, and Technetics 1000 series Includes meter turbine wheel included in modular assembly that inserts into outlet side of valve. Turbine Meter Assembly 1" thread for Performa CV - 1033317 Turbulator Kit 1040021 MD7133 935T Turbo Distributor Your Price: $95.00 Your Price: $49.95 Turbine Meter Assembly 1" thread for Performa CV - 1033317 Includes meter turbine wheel included in modular assembly that inserts into outlet side of valve. Turbulator Kit 1040020 used with some Autotrol Valves. Includes 3 ft. of 13/16" pipe and instructions to construct to fit your size tank. Upgrade Kit 255/740 Logix Electronic replacing 440i series timer Upgrade Kit Performa 740 Logix Electronic replacing 440i series timer Your Price: $129.00 Your Price: $129.00 Upgrade Kit 255/740 Logix Electronic replacing 440i and 440iHV series timer Retrofit 440i timer with the 740 Logix Electronic Control Day Timer Assembly used on the Autotrol 263 and 268 Performa Valve. Valve - 253 Autotrol w/740 Back Wash Only Valve - 255 Autotrol 740 Logix Day Timer Softener Control Your Price: $284.00 Your Price: $279.00 Valve - 253 Autotrol w/740 Back Wash Only Commonly used on tanks for backwashing Carbon, Birm, and Acid Neutralizing Medium such as Calcite. Valve - 255 Autotrol 740 Logix Day Timer Softener Control Logix 740 programable timer is used to control the Day(s) of Regeneration, and allows control the Time of Regeneration. Valve - 255 Autotrol w/440i HV Softener Control - OBSOLETE - Valve - 268 Performa 740 Logix Electronic Control for Softener Your Price: $299.00 255 W/440i HV Timer Six Day Osmonics has taken the proven performance of the industry-standard Autotrol 155 conditioning valve, and made it even stronger, and more economical and efficient than ever. Valve - 268 Performa 740 Logix  Electronic Control for Softener Valve - 740 Logix Electronic 263 Backwash Only Control Valve - 740 Logix Electronic 268 Filter Valve Greensand Your Price: $295.00 Your Price: $299.00 742 ( upgraded from 740 ) Logix Electronic Control Timer Assembly on the Autotrol 263 Performa Backwash Only Valve. 740 Logix Electronic Control Timer Assembly on the Autotrol 268FA Performa Filter Application Valve for use on Greensand Tanks, and Potassium Permanganate Feeders. Valve - 760 Logix Electronic 268 Metered Softener Control Valve - 760 Logix Electronic 255 Metered Softener Control Your Price: $349.00 Your Price: $329.00 760 / 762 Logix Electronic Meter Control Timer Assembly on the Autotrol 268 Performa Softener Valve. 760 Logix Electronic Meter Control Timer Assembly on the Autotrol 255 Softener Valve. Valve Body Performa w/o parts 1035606 or 1244651 Video Autotrol 155 and 255 Valves Your Price: $179.00 Your Price: $29.00 Valve Body Performa  w/o parts 1035606 Common repair and maintenance for Autotrol 155 ( 1550-TC ) AND 255 Valve with 440 and 460 Controls is shown on this Video. Now together on ONE DVD. Washer 50F For 156,165 Bypass - OBSOLETE Washer Skipper Wheel 440 89F 1030659 Your Price: $1.00 50F Washer was used in old style Autotrol By Pass Valves. This part and the By Pass it was used with are no longer available. Washer Skipper Wheel 440

• About Us
• Email Support
• Helpful Information

• View Cart
• Sign-In / View Account
• Order Status

• All Category Index
• All Product Index

• Return Policy
• Privacy Policy
• Terms & Conditions